Process indicator, PT100, Thermocouple, Resistor, 11V-265V AC/DC

The JUNIOR-P model is the ultimate SIMPLE and ECONOMICAL multifunction panel display, accepting a wide variety of inputs.

• PROCESS (±10V, ±200V and ±20mA)
• TEMPERATURE (Pt100, Pt1000, TC J, K, T and N)
• POTENTIOMETER (100 Ohm to 100 KOhm)
• RESISTANCE (999.9 Ohm, 9999 Ohm and 50.00 KOhm)

It accepts a wide variety of input signals to control industrial process variables. It is easily scalable to the desired engineering units, either directly via the keypad or by adjusting the actual level of the input signal.

Universal AC/DC power supply for a wide voltage range from 12V to 230V.

Fully programmable, they allow you to select the desired input type and supply an excitation signal of 24V DC @ 30mA .

• 4 digits, 14mm high , and a maximum reading range of -9999 to 9999 for JR-P
• Programmable decimal point

It has three front pushbuttons which allow you to fully configure the device, and an active setpoint indicator LED for each of the two output relays (when the 2RE output option is installed).

The instrument displays and stores the maximum and minimum values, and resets them to their current values upon reset. It detects and stores the maximum and minimum readings of the controlled variable after the last reset. These functions are accessible from the instrument's keypad.

Capable of measuring temperature for Pt100 (3 wires), Pt1000 (2 wires) (IEC 60751) and Thermocouple (IEC 60584-1) input signals, Process , Potentiometric (3 wires) and Resistance (2 wires).