Load Cell Indicator 20mm, 11V-265V AC/DC

The JUNIOR-C model is a SIMPLE and ECONOMICAL indicator, ideal for load cells.

– LOAD CELL (±300mV, ±30mV)

The JR20-C model, ideal for connection to load cells, adaptable to most load cells on the market, is easily scalable in the desired engineering units, either directly by the keypad or by the actual level of the input signal.

Universal AC/DC power supply for a wide voltage range.

Fully programmable, they allow you to select the desired input type and supply an excitation signal of 5V or 10V DC and up to a maximum load of 30mA.

• 4 digits, 20mm high , and maximum reading range -1999 to 9999 for JR20-C
• Programmable decimal point

It has three front pushbuttons which allow you to fully configure the device, and an active setpoint indicator LED for each of the two output relays (when the 2RE output option is installed).
Indication of maximum and minimum values and setting of the current display value of the same at the time of performing the RESET.
The instrument detects and stores the maximum and minimum readings reached by the controlled variable after the last RESET performed.
These functions are accessible from the instrument's keypad. TARE and TARE RESET functions can be accessed from the keypad or remotely via the logic input (OC) or free contact located on the rear connector.