0-10V MICRA output option

Analog output 0-10V, which can be incorporated into the new MICRA family by means of an additional NMV current output option, which is installed on the motherboard via an M3 plug-in connector.
The output is isolated from the input signal and power supply. The board has a two-way connector [(+) and (-)] that provides a variable signal between 0 and 10V, linearly proportional to a user-defined display variation.
This provides a signal that can be used to control variables and act proportionally to the magnitude of the effect being controlled. These signals can also be used to transmit display information to chart recorders, controllers, remote displays, or other repeating instruments. The instrument will detect the selected option and act accordingly. The display values that provide the output signal at the two extremes of the range (outHI and outLo) are entered using the panel keys within the corresponding programming module. The analog output then follows the display variation between the programmed upper and lower points.
The output signal can also vary inversely to the display variation if the lower value of the display range is assigned to the upper value of the analog output (outHI) and the upper value of the display range to the lower output (outLO).